Bike Rim Stickers Instructions
1- The wheels should be Cleaned and Degreased (Use Soap and Water - 75% Isopropyl Alcohol).
2- Cut every pieces individually
3- Stick the first one on the wheel
4- Don't remove the backing paper at one time, Remove just a part of it and stick it to the wheel.
5- Start to install the piece by removing the backing paper gradually.
6- Take the other pieces and install them using masking tape, Do not remove the backing paper, Just stick the masking tape in top of them.
- This step will help you know how much space that you gonna leave between the letters/stripes.
- This step, you're gonna do it just in the first side of the rim, Cause you'll remember the spaces, And you've already installed one side, So the spaces will be known.
7- Before you remove the transfer paper, Press down the stickers using your thumb.
8- Remove the transfer paper gently and slowly, Especially at the small letters.
9- Apply Heat (heat gun or hair dryer), This step is to activate the adhesive.
10- Do Not Use any shiny products to the tire for the first months, until the adhesive is activated 100%, If you want to use them, Just be careful to not touch the stickers, Because It contains some oily compounds, And the stickers don't like oil!
Notes :
* If you followed these steps literally, I guarantee you that the stickers will last long more than me and you!
* If you not followed these steps, I guarantee you that the stickers will peel off from the 1 week maybe the first day!
* If you followed these steps literally, you clean the Bike right, and you install them right, and they peeled off, then you will get full refund!!
PS: Decals Will NOT stick to ceramic coated surfaces!
- Instructions paper included with the package!
IF You Need More Help, Please Contact Us, We'll Be Very Happy To Help You!