Bike Decals Instructions
1- The Bike must be clean and washed, especially around the wheels and the wheels.
2- Now the Bike is washed, you need a NEW Microfiber towel and 70% Isopropyl Alcohol (70% recommended by pro, not more not less)
3- Clean the area were the decals will be in, by using Microfiber towel and 70% Isopropyl Alcohol (Rims, Fairings...)
4- Alcohol will remove any left dust and oily things, when you wash the Bike, Please do not use any shining products, cause it have some oily things, and we don't want oily surface!
5- Install the graphic, take your time, the key for great results is to be patient and not panic!
6- Some decals have an extra vinyl on the edges, Especially the one that will go in a curved area, for these ones, you're gonna cut it on edges.
7- When you finish, apply heat on the graphic with heat gun or hair dryer, especially on the edges, Heat will activate the adhesive!
8- First washes, you need to be gentle on the graphics and take away from the graphics any oily things!!
Notes :
* If you want to install the graphics in WET method, try to install ONLY the graphics that will go on a flat areas/surfaces, and use DRY method to install the graphics on curved areas.
* If you followed these steps literally, I guarantee you that the graphics will last long more than me and you!
* If you not followed these steps, I guarantee you that the graphics will peel off from the 1 week maybe the first day!
* If you followed these steps literally, you clean the Bike right, and you install them right, and they peeled off, then you will get full refund!!
PS: Decals Will NOT stick to ceramic coated surfaces!
- Instructions paper included with the package!
IF You Need More Help, Please Contact Us, We'll Be Very Happy To Help You!